AKW SmartCare Lever Care 8.5kW Wireless with M11 Pump & Silentflow+ (29118CGR)

AKW SmartCare Lever Care 8.5kW Wireless with M11 DigiPump & Silentflow+ Waste (29118CGR)

The Quiet Option for Pumped Wet Rooms

This package pairs the AKW SmartCare Lever 8.5kW Electric Shower with the M11 DigiPump, wireless control, and Silentflow+ – AKW's noise-reducing pumped gulley for Tuff Form wet floor formers.

Pump noise is the usual complaint with pumped waste systems, and it's the reason some installers avoid them in bedrooms-adjacent en-suites and flats. Silentflow+ was designed specifically to address it: the internal geometry uses flow guides and a balanced chamber to cut the gulping and turbulence that make conventional pumped wastes audible during and after a shower. AKW's own testing puts it level with the nearest competitor's quiet-rated waste at 11 litres per minute, and ahead of it above that – which matters, because the DigiPump range can shift up to 20 litres per minute.

It is a low-profile unit designed for Tuff Form formers with vinyl floor covering, and connects directly to the M11, M17 and M20 DigiPumps through an integrated 22mm John Guest push-fit. A John Guest adaptor for 15mm pipework is supplied. The bayonet cover is a direct replacement for existing TF75 installations, which makes it a straightforward upgrade on an older wet room.

Which Waste Do I Need?

Silentflow+ is specified for wet floor former installations, and is the one to choose where running noise matters. Screedmaster is the standard former waste. If you're fitting a shower tray instead, the PW50 or PW90 packages are the ones to look at.

Key Features & Benefits

Genuinely Quieter
Flow guides and a balanced chamber design cut the gulping and turbulence that make pumped wastes audible.

Matched to the DigiPump Range
Holds its noise advantage at the higher flow rates the DigiPump can deliver.

Direct 22mm Push-Fit
Connects straight to M11, M17 and M20 DigiPumps; 15mm adaptor supplied.

TF75 Replacement Fit
The bayonet cover drops into existing TF75 installations.

Wireless Shower-to-Pump Link
No interconnecting control cable to run between units.

Easy-Grip Lever Control
A single ergonomic lever for starting, stopping and adjusting temperature, operable one-handed.

Care Accessory Kit
150kg load-bearing 1m riser rail doubling as a support rail, 2m anti-kink hose, shelf with integral hose retainers, sliding handset holder, extra wall holder and removable 3-mode shower head.

Independently Accredited
BEAB Care certified, RNIB tried & tested and DSDC accredited.

Specifications

• Power Output: 8.5kW
• Pump: AKW M11 DigiPump
• Waste: Silentflow+ pumped gulley, 15mm & 22mm John Guest
• Suits: Tuff Form wet floor formers with vinyl floor covering
• Pump Compatibility: M11, M17 and M20 DigiPump
• Replacement Fit: Bayonet cover fits existing TF75 installations
• Control: Wireless shower-to-pump link, easy-grip lever
• Riser Rail: 1m, 150kg load-bearing
• Hose: 2m anti-kink
• Accreditations: BEAB Care, RNIB, DSDC
• SKU: 29118CGR

Available sizes · output · SKU
8.5kW · Wireless / M11 DigiPump & Silentflow+ · 29118CGR