Tavares Light Slate Effect Matt Porcelain Wall & Floor Tile 600x1200mm (Per Box of 2 Tiles)
Essential Bathrooms stock items ordered before 3pm are dispatched the same working day for next working day delivery. Stock availability is confirmed at the point of order.
Priced per box of 2 tiles. Each box covers approximately 1.44m² (2 tiles at 600x1200mm, 0.72m² per tile). That works out at £36.18 per tile, or about £50.25 per m². Tiles are sold in full boxes only.
Bring the drama of natural slate to walls and floors with this stone-effect matt porcelain tile – a pale, light stone face with the layered markings of split slate, in a rectified format that lays with tight, clean joints.
The matt finish keeps the surface soft and natural with a subtle stone texture, and the pattern shifts from tile to tile so a floor or wall has the varied character of real quarried stone. At 600x1200mm it is a large-format tile that covers a big area with very few grout lines, so a room feels calm and spacious, and it makes a striking feature wall behind a bath or basin.
Made from porcelain, it is dense, low-porosity and hard-wearing, and it is rated for both walls and floors, including showers and wet rooms.
Product Details
| Tile size | 600 x 1200mm |
| Material | Porcelain |
| Finish | Matt |
| Colour | Pale, light stone |
| Edge | Rectified |
| Suitable for | Walls and floors, internal |
| Rooms | Bathroom, kitchen, hallway, living area, conservatory |
| Sold as | Per box (full boxes only) |
| Tiles per box | 2 |
| Coverage per box | 1.44m² |
| Coverage per tile | 0.72m² |
| Product code | EBNB15792 |
Coverage & Ordering
This tile is sold in full boxes of 2. Each box covers approximately 1.44m² (roughly 1.4 tiles per square metre). To work out how many boxes you need, divide your area in square metres by 1.44 and round up to the next whole box. We recommend allowing an additional 10% for cuts, wastage and future repairs.
Tiles are produced in batches and slight variation in shade between batches is normal. Please order the full quantity you need in one go so that everything comes from the same batch.
Installation Notes
Fix with a flexible, large-format porcelain adhesive using a full-bed (back-buttered) technique so the tile is fully supported, and use a levelling system on floors to keep the surface flat. Rectified edges allow a narrow 2-3mm joint in a grout colour close to the tile so the surface reads as one continuous plane. Clean with a neutral, non-abrasive cleaner.
Complete the Range
The Tavares slate-effect tile comes in four stone tones - light, fog, gold and dark - in a matt finish across 300x600mm, 600x600mm and 600x1200mm formats, so one dramatic stone look can run through a whole bathroom, kitchen or hallway. Browse the full Tavares range.