Impey Aqua-Dec EasyFit Wetroom Floor Former - For Tiled Floors
Delivery: £30.00 to UK mainland
The Aqua-Dec EasyFit is Impey's most versatile wetroom floor former, made in Somerset. Its central drain plate rotates through 360 degrees, so the drainage point can be turned to clear a joist or any other obstruction under the floor rather than the floor being worked around the drain. At 22mm it matches the depth of standard floorboards, and it can be trimmed up to the smooth central area and cut with a diamond cutting blade.
Four pre-formed gradients fall to the centre at a 1 in 40 average gradient, with a maximum flow rate of 36 litres per minute. It is tested to support loads of up to 300kg (47 stone). It fits direct to timber joists at centres up to 415mm with no underboarding, or beds into a screeded concrete floor.
This former is for a tiled floor finish only. For a vinyl or Altro finish, the Level-Dec range is the correct product and takes its own vinyl drainage.
Choose your drain from the dropdown — the former and drain are priced together. Every option in the Waste dropdown is a complete tiled floor drain - square, Paragon, tiled insert or Slim+ - in a horizontal or vertical outlet.
- 360 degree rotating drain aperture clears joists and underfloor obstructions
- 22mm thick, the same depth as standard floorboards
- No underboarding required on joists at up to 415mm centres
- Trimmable up to the smooth central area; cut with a diamond cutting blade
- 1 in 40 average gradient; tested to support loads of up to 300kg (47 stone)
- Compression-moulded GRP with a cellular underside structure for rigidity
- Suitable for timber or concrete floors
- Compatible with underfloor heating
- Choose your tiled drain from the Waste dropdown
- Lifetime Watertight Guarantee when completed with Impey WaterGuard
Product Details
| Specification | Detail |
|---|---|
| Thickness | 22mm at the outer rim |
| Drain aperture | Circular, rotates 360 degrees |
| Gradients | 4 way falls to drainage |
| Flow rate | Maximum 36 l/min |
| Drain outlet | 43mm solvent weld, 50mm water seal |
| Drain | Chosen from the Waste dropdown; the former and drain are priced together |
| Drain options | Square (Slot, Fibre, Grid, Identity, Stamp), Paragon, Tiled insert 14mm, Slim+ |
| Suitable floor finish | Tiled |
| Suitable floor type | Timber or concrete |
| Underboarding | Not required at joist centres up to 415mm |
| Trimmable | Yes, up to the smooth central area (diamond cutting blade) |
| Room position | Centre of room, corner, centre of wall or alcove |
| Gradient | 1 in 40 on average |
| Load | Tested to 300kg (47 stone) |
| Guarantee | Lifetime Watertight Guarantee when completed with Impey WaterGuard |
Which drain do I need?
Choose your drain from the dropdown — the former and drain are priced together.
- Horizontal outlet - the usual choice where the waste pipe runs sideways beneath the floor between the joists.
- Vertical outlet - where the waste drops straight down, typically on a concrete floor or where there is clear space below.
- Square drain tops - Slot, Fibre, Grid, Identity and Stamp, all in brushed stainless steel, horizontal or vertical outlet.
- Paragon - a larger format drain top in brushed or polished stainless steel, horizontal or vertical outlet.
- Tiled insert 14mm - a drain top you tile into, so the floor finish carries across the drain. Horizontal or vertical outlet.
- Slim+ - a shallower drain body for installations with limited depth below the floor, in Slot, Fibre, Grid, Identity and Stamp. Horizontal outlet only.
Waterproofing
A tanking membrane must be laid before tiling. Impey WaterGuard is the matching system and is required for the full lifetime guarantee on the finished wetroom.