Open A Trade Account!
Open A Trade Account!
Tiles crack when the floor underneath them moves. A decoupling membrane separates the two, absorbing the stress so it doesn't reach the tiles. This...
View full detailsNew screeds and damp floors can ruin tiles and floor coverings as moisture works its way up. This single-coat epoxy surface DPM suppresses moisture...
View full detailsPorous screeds and renders can suck the moisture out of adhesive and levelling compound before it has a chance to bond. This acrylic primer seals t...
View full detailsBroken screed, chipped step edges or holes left after removing old fittings? This fast-setting repair mortar is a non-slump, cement-based mix that ...
View full detailsA quick-drying floor skim for those last little dips and joints before laying vinyl, tiles or other floor coverings. It feathers right down to noth...
View full detailsFor floors that need building up as well as flattening, this rapid-setting fibre floor leveller goes down to as much as 50mm in a single pour. It's...
View full detailsGetting a floor flat is the first step to a tiled or vinyl finish that lasts. This two-part latex fibre floor leveller is fibre reinforced, flexibl...
View full detailsTiles and floor coverings are only as good as the floor underneath them. Our floor preparation range has everything to get a sub-floor sound, flat and dry before you tile or lay vinyl.
Fill holes, rebuild broken screed and re-form step edges with a fast-setting, non-slump repair mortar.
Choose a two-part latex fibre leveller, a rapid-setting fibre floor leveller that pours up to 50mm in one go, or a fast-drying feather edge skim for the final 0–6mm.
Seal porous backgrounds with acrylic primer, and suppress moisture from damp floors with a single-coat epoxy surface DPM rated to 98% RH.
On cracked or green screeds, a crack-bridging decoupling membrane stops floor movement reaching the tiles.
When the floor's ready, see our tile adhesive, grout and tile backer boards.